Hello, welcome to Tongda Technology (Dalian) limited official website!

Phone:86- 136 1084 5997

Tel:86-0411-87553295-888

Key Words:Stamping die, stamping die plate, stamping parts, mold manufacturing, mold supply, mold parts processing, mold parts, auto parts and components, Dalian Development Zone, stamping, stamping parts

site:Home > News List > Frequently Asked Questions

Frequently Asked Questions

Problems in die making of stamping parts Common

Original:Tongda Technology (Dalian) Co., Ltd. Writer:Jessie Date: 2016-05-16 Views: 827
 

Possible problems in the process of stamping of

mould.


punch: uncoiling line 

 1, mixed with a foreign body caused by punch;


India: sliding caused 

2, by roller sliding occurs in a sudden stop or acceleration;


India: cleaning roller

 3, or roller feeding roller attachment caused by foreign bodies under normal circumstances, can be printed on the sheet roller body you can get rid of


 burr: steel plate

 4, section parts burrs, in section as a benchmark, burr height is above 0.2mm, here the iron powder will damage the mold and produce


convex and 

5, concave; roll grinding edge wrinkling wrinkle: scene might guide roll uncoiling line may be the guide roll gap hours o The mold to produce n because of the imbalance caused by the roll material into


;

  • View others